View E431028-3C90-A400-P_4403866.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FERROXCUBE
DATA SH EET A SHEET
E43/10/28 Planar E cores and accessories
Supersedes data of February 2002 2004 Sep 01
Ferroxcube
Planar E cores and accessories
CORES Effective core parameters of a set of E cores SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.276 13900 61.1 229 229 35 UNIT mm-1 mm3 mm mm2 mm2 g
handbook, halfpage
E43/10/28
43.2 0.9 34.7 min. 8.1 0.2 5.4 0.13 9.5 0.13
27.9 0.6
R0.64 ref. typ.
R0.81 ref. typ.
CBW411
Dimensions in mm.
Fig.1 E43/10/28 core half.
Effective core parameters of an E/PLT combination SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.226 11500 50.4 229 229 24 UNIT mm-1 mm3 mm mm2 mm2 g
handbook, halfpage
43.2 0.9 4.1 0.13
Ordering information GRADE 3C90 3C92 3C93 3C94 3F3 3F4 TYPE NUMBER PLT43/28/4-3C90 PLT43/28/4-3C92 PLT43/28/4-3C93 PLT43/28/4-3C94 PLT43/28/4-3F3 PLT43/28/4-3F4
Dimensions in mm.
CBW412
27.9 0.6
R0.64 ref. typ.
Fig.2 PLT43/28/4.
2004 Sep 01
2
Ferroxcube
Planar E cores and accessories
E43/10/28
Core halves for use in combination with an E core AL measured in combination with a non-gapped core half, clamping force for AL measurements, 40 20 N, unless stated otherwise. GRADE 3C90 AL (nH) 250 3%(1) 315 3%(1) 400 3%(1) 630 5% 1000 10% 8030 25% 3C92 3C93 3C94 6300 25% 7310 25% 250 400 3%(1) 3%(1) 315 3%(1) 630 5% 1000 10% 8030 25% 3F3 250 400 3%(1) 3%(1) 315 3%(1) 630 5% 1000 10% 7310 25% 3F4 250 400 3%(1) 3%(1) 315 3%(1) 630 5% 1000 10% 3860 25% Note 1. Measured in combination with an equal gapped E core half, clamping force for AL measurements, 40 20 N. e 55 69 87 138 219 1710 1380 1610 55 69 87 138 219 1710 55 69 87 138 219 1600 55 69 87 138 219 850 AIR GAP (m) 1100 800 700 400 250 0 0 0 1100 800 700 400 250 0 1100 800 700 400 250 0 1100 800 700 400 250 0 TYPE NUMBER E43/10/28-3C90-E250-E E43/10/28-3C90-E315-E E43/10/28-3C90-E400-E E43/10/28-3C90-A630-E E43/10/28-3C90-A1000-E E43/10/28-3C90 E43/10/28-3C92 E43/10/28-3C93 E43/10/28-3C94-E250-E E43/10/28-3C94-E315-E E43/10/28-3C94-E400-E E43/10/28-3C94-A630-E E43/10/28-3C94-A1000-E E43/10/28-3C94 E43/10/28-3F3-E250-E E43/10/28-3F3-E315-E E43/10/28-3F3-E400-E E43/10/28-3F3-A630-E E43/10/28-3F3-A1000-E E43/10/28-3F3 E43/10/28-3F4-E250-E E43/10/28-3F4-E315-E E43/10/28-3F4-E400-E E43/10/28-3F4-A630-E E43/10/28-3F4-A1000-E E43/10/28-3F4
2004 Sep 01
3
Ferroxcube
Planar E cores and accessories
Core halves for use in combination with a plate (PLT) AL measured in combination with a plate (PLT), clamping force for AL measurements, 40 20 N. GRADE 3C90 AL (nH) 250 3% 315 3% 400 3% 630 5% 1000 10% 9250 25% 3C92 3C93 3C94 7460 25% 8700 25% 250 3% 315 3% 400 3% 630 5% 1000 10% 9250 25% 3F3 250 3% 315 3% 400 3% 630 5% 1000 10% 8700 25% 3F4 250 3% 315 3% 400 3% 630 5% 1000 10% 4660 25% e 45 57 72 113 180 1710 1340 1560 45 57 72 113 180 1710 45 57 72 113 180 1560 45 57 72 113 180 850 AIR GAP (m) 1100 800 700 400 250 0 0 0 1100 800 700 400 250 0 1100 800 700 400 250 0 1100 800 700 400 250 0
E43/10/28
TYPE NUMBER E43/10/28-3C90-A250-P E43/10/28-3C90-A315-P E43/10/28-3C90-A400-P E43/10/28-3C90-A630-P E43/10/28-3C90-A1000-P E43/10/28-3C90 E43/10/28-3C92 E43/10/28-3C93 E43/10/28-3C94-A250-P E43/10/28-3C94-A315-P E43/10/28-3C94-A400-P E43/10/28-3C94-A630-P E43/10/28-3C94-A1000-P E43/10/28-3C94 E43/10/28-3F3-A250-P E43/10/28-3F3-A315-P E43/10/28-3F3-A400-P E43/10/28-3F3-A630-P E43/10/28-3F3-A1000-P E43/10/28-3F3 E43/10/28-3F4-A250-P E43/10/28-3F4-A315-P E43/10/28-3F4-A400-P E43/10/28-3F4-A630-P E43/10/28-3F4-A1000-P E43/10/28-3F4
2004 Sep 01
4
Ferroxcube
Planar E cores and accessories
Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 320 320 370 370 320 320 320 320 300 300 250 250 f = 100 kHz; B = 100 mT; T = 100 C 1.8 1.5 1.4 1.2 1.4(1) 1.2(1) 1.4 1.2 1.8 1.5 - - CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 100 C - - 8.0 7.0 8.0(1) 7.0(1) 8.0 7.0 - - - -
E43/10/28
f = 400 kHz; B = 50 mT; T = 100 C - - - - - - - - 2.7 2.25 - -
E+E43-3C90 E+PLT43-3C90 E+E43-3C92 E+PLT43-3C92 E+E43-3C93 E+PLT43-3C93 E+E43-3C94 E+PLT43-3C94 E+E43-3F3 E+PLT43-3F3 E+E43-3F4 E+PLT43-3F4
Measured at 140 C.
1.
Properties of core sets under power conditions (continued) B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 320 320 370 370 320 320 320 320 300 300 250 250 f = 500 kHz; B = 50 mT; T = 100 C - - - - - - - - - - - - CORE LOSS (W) at f = 500 kHz; B = 100 mT; T = 100 C - - - - - - - - - - - - f = 1 MHz; B = 30 mT; T = 100 C - - - - - - - - - - 4.2 3.5 f = 3 MHz; B = 10 mT; T = 100 C - - - - - - - - - - 6.5 5.5
E+E43-3C90 E+PLT43-3C90 E+E43-3C92 E+PLT43-3C92 E+E43-3C93 E+PLT43-3C93 E+E43-3C94 E+PLT43-3C94 E+E43-3F3 E+PLT43-3F3 E+E43-3F4 E+PLT43-3F4
2004 Sep 01
5
Ferroxcube
Planar E cores and accessories
DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS
E43/10/28
This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.
2004 Sep 01
6

▲Up To Search▲

Price & Availability of E431028-3C90-A400-P

	To Download E431028-3C90-A400-P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .